Inhibited chromate-free conversion coatings on aluminum alloys AMg5 and AMg6
https://doi.org/10.61852/2949-3412-2024-2-1-119-126
Abstract
Aluminum alloys with a high Mg content (above 4.5%) have high strength, but are more sensitive to corrosion than alloys with a low Mg content. To protect aluminum alloys, conversion coatings obtained by chemical oxidation can be used. It was previously shown that the alkaline chromate-free converting composition of IFKHANAL-3 makes it possible to obtain conversion coatings with high protective properties on the surface of the alloy. In this work, modifications of chromate-free inhibited conversion coatings IFKHANAL-3 were investigated in order to obtain coatings with high protective properties on aluminum alloys AMg5 and AMg6. The effectiveness of the coatings obtained was evaluated based on the results of corrosion and electrochemical tests. Modifying additives were used to enhance the protective effect.
About the Authors
D. O. Chugunov
A.N. Frumkin Institute of Physical Chemistry and Electrochemistry, Russian Academy of Sciences
Russian Federation
Russian Federation
Leninskii pr. 31, 119071 Moscow
Yu. A. Kuzenkov
A.N. Frumkin Institute of Physical Chemistry and Electrochemistry, Russian Academy of Sciences
Russian Federation
Russian Federation
Leninskii pr. 31, 119071 Moscow
References
1. В.С. Синявский и В.Д. Васильков, Коррозия и защита алюминиевых сплавов. М.: Металлургия, 1986, С. 386.
2. Коррозия алюминия и алюминиевых сплавов. Под ред. Джозефа Р. Дейвиса. М.: НП «АПРАЛ», 2016, С. 333.
3. M.E. McMahon, R.L. Haines, P.J. Steiner, J.M. Schulte, S.E. Fakler and J.T. Burns, Beta phase distribution in Al-Mg alloys of varying composition and temper, Corros. Sci., 2020, 169, 108618. doi: 10.1016/j.corsci.2020.108618
4. L. Guan, Y. Zhou, B. Zhang, J.Q. Wang, E.-H. Han and W. Ke, Influence of aging treatment on the pitting behavior associated with the dissolution of active nanoscale β-phase precipitates for an Al–Mg alloy, Corros. Sci., 2016, 103, 255–267. doi: 10.1016/j.corsci.2015.11.026
5. J. Zhao, L. Xia, A. Sehgal, D. Lu, R.L. McCreery and G.S. Frankel, Effects of chromate and chromate conversion coatings on corrosion of aluminum alloy 2024-T3, Surf. Coat. Technol., 2001, 140(1), 51–57. doi: 10.1016/S0257-8972(01)01003-9
6. Commission Directive 2001/59/EC of 6 August 2001 Adapting to technical progress for the 28th time Council Directive 67/548/EEC on the approximation of laws, regulations and administrative provisions concerning the classification, packaging and labeling of hazardous substances relation to the EEA). Official Journal L 225, 21/08/2001, p. 0001–0333.
7. Y.A. Kuzenkov, D.O. Chugunov, S.V. Oleynik and V.L. Voititsky, Protective chromate-free conversion coatings on AMg6 aluminum alloy with different types of surface treatment, Int. J. Corros. Scale Inhib., 2022, 11(2), 541–552. doi: 10.17675/2305-6894-2022-11-2-5
8. Y.A. Kuzenkov, C.D. Hong and V.A. Karpov, Corrosion protection of aluminum alloys with chromate-free inhibited conversion coatings in a tropical climate, Int. J. Corros. Scale Inhib., 2022, 11(4), 1692–1702. doi: 10.17675/2305-6894-2022-11-4-18
9. Кузнецов Ю. И., Олейник С. В., Хаустов А. В, Химическое оксидирование сплава АМг3 в щелочных молибдатсодержащих растворах, Защита металлов, 2003, 39(3). 352–356.
Review
For citations:
Chugunov D.O., Kuzenkov Yu.A. Inhibited chromate-free conversion coatings on aluminum alloys AMg5 and AMg6. Title in english. 2024;(1):119-126. (In Russ.) https://doi.org/10.61852/2949-3412-2024-2-1-119-126
Views:
188
Email this article 