Corrosion resistance of structural metals with different sample orientations at different distances from the seashore
https://doi.org/10.61852/2949-3412-2024-2-2-29-44
Abstract
The rates of chloride deposition on the surface of the material were determined using different types of samplers, and linear correlation coefficients between the sampler data were calculated. An exponential dependence of the average annual rate of chloride deposition on the distance to the seashore was obtained. The categories of corrosive aggressiveness of the atmosphere were determined for different orientations of samples of carbon steel, zinc, copper and aluminum and at different distances from the seashore.
About the Authors
Y. M. Panchenko
A.N. Frumkin Institute of Physical Chemistry and Electrochemistry, Russian Academy of Sciences
Russian Federation
Russian Federation
Leninsky pr. 31, 119071 Moscow
A. I. Marshakov
A.N. Frumkin Institute of Physical Chemistry and Electrochemistry, Russian Academy of Sciences
Russian Federation
Russian Federation
Leninsky pr. 31, 119071 Moscow
T. A. Nenasheva
A.N. Frumkin Institute of Physical Chemistry and Electrochemistry, Russian Academy of Sciences
Russian Federation
Russian Federation
Leninsky pr. 31, 119071 Moscow
T. N. Igonin
A.N. Frumkin Institute of Physical Chemistry and Electrochemistry, Russian Academy of Sciences
Russian Federation
Russian Federation
Leninsky pr. 31, 119071 Moscow
A. E. Kutyrev
All-Russian Research Institute of Aviation Materials of the National Research Center «Kurchatov Institute» (NRC «Kurchatov Institute» – VIAM)
Russian Federation
Russian Federation
17 Radio St., Moscow, 105005
M. A. Fomina
All-Russian Research Institute of Aviation Materials of the National Research Center «Kurchatov Institute» (NRC «Kurchatov Institute» – VIAM)
Russian Federation
Russian Federation
17 Radio St., Moscow, 105005
A. I. Vdovin
All-Russian Research Institute of Aviation Materials of the National Research Center «Kurchatov Institute» (NRC «Kurchatov Institute» – VIAM)
Russian Federation
Russian Federation
17 Radio St., Moscow, 105005
References
1. I.S. Cole, D.A. Paterson, W.D. Ganther, A. Neufeld, B. Hinton, G. McAdam, M. McGeachie, R. Jeffery, L. Chotimongkol, C. Bhamornsut, N.V. Hue and S. Purwadaria, Holistic model for atmospheric corrosion – Part 3 – Effect of natural and man made landforms on precipitation of marine salts in Australia and south-east Asia, Corros. Eng. Sci. Technol., 2003, 38, no. 4, 267–274. doi: 10.1179/147842203225008921
2. M.J. Ten Harkel, The effects of particle-size distribution and chloride depletion of sea- salt aerosols on estimating atmospheric precipitation at a coastal site, Atmos. Environ., 1997, 31, no. 3, 417–427. doi: 10.1016/S1352-2310(96)00249-X
3. M. Morcillo, B. Chico, E. Otero and L. Mariaca, Effect of marine aerosol on atmospheric corrosion, Mater. Perform., 1999, 38, 72–77.
4. S. Feliu, M. Morcillo and B. Chico, Effect of distance from sea on atmospheric corrosion rate, Corrosion, 1999, 55, no. 9, 883–891. doi: 10.5006/1.3284045
5. I.S. Cole, W.D. Ganther, D.A. Paterson, G.A. King, S.A. Furman and D. Lau, Holistic model for atmospheric corrosion – Part 2. Experimental measurement of precipitation of marine salts in a number of long range studies, Corros. Eng. Sci. Technol., 2003, 38, no. 4, 259–266. doi: 10.1179/147842203225008886
6. I.S. Cole, W.Y. Chan, G.S. Trinidad and D.A. Paterson, Holistic model for atmospheric corrosion – Part 4. Geographic information system for predicting airborne salinity, Corros. Eng. Sci. Technol., 2004, 39, no. 1, 89–96. doi: 10.1179/147842204225016831
7. G.R. Meira, M.C. Andrade, I.J. Padaratz, M.C. Alonso and J.C. Borba, Measurements and modelling of marine salt transportation and precipitation in a tropical region in Brazil, Atmos. Environ., 2006, 40, no. 29, 5596–5607. doi: 10.1016/j.atmosenv.2006.04.053
8. H.Guan, A.J. Love, C.T. Simmons, O. Makhnin and A.S. Kayaalp, Factors influencing chloride deposition in a coastal hilly area and application to chloride deposition mapping, Hydrol. Earth Syst. Sci., 2010, 14, 801–813. doi: 10.5194/hess-14-801-2010
9. J.Alcántara, B. Chico, I. Díaz, D. de la Fuente and M. Morcillo, Airborne chloride deposit and its effect on marine atmospheric corrosion of mild steel, Corros. Sci., 2015, 97, 74–88. doi: 10.1016/j.corsci.2015.04.015
10. M. Vacek, V. Křivý, K. Kreislová, M. Vlachová and M. Kubzová, Experimental Measurement of Deposition Chloride Ions in the Vicinity of Road Cut, Materials, 2023, 16, no. 1, 88. doi: 10.3390/ma16010088
11. J.J.S. Lee and H.J. Moon, Salinity distribution of seashore concrete structures in Korea, Building and Environment, 2006, 41, no. 10, 1447–1453. doi: 10.1016/j.buildenv.2005.05.030
12. G.R. Meira, C. Andrade, C. Alonso, J.C. Borba and M. Padilha, Durability of concrete structures in marine atmosphere zones – The use of chloride deposition rate on the wet candle as an environmental indicator, Cement & Concrete Composites, 2010, 32, no. 6, 427–435. doi: 10.1016/j.cemconcomp.2010.03.002
13. A. Castañeda, J. J. Howland Albear, F. Corvo and R. Marrero, Estudio de la agresividad corrosiva de la atmósfera para el acero de refuerzo embebido en el hormigón armado en La Habana, Rev. Lat. Met. Mater., 2015, 35, no. 2, 173–188.
14. I.S. Cole, D.A. Paterson and W.D. Ganther, Holistic model for atmospheric corrosion. Part 1. Theoretical framework for production, transportation and deposition of marine salts, Corros. Eng., Sci. Technol., 2003, 38, no 2, 129–134. doi: 10.1179/147842203767789203
15. I.S. Cole and D.A. Paterson, Holistic model for atmospheric corrosion. Part 5. Factors controlling precipitation of salt aerosol on candles, plates and buildings, Corros. Eng., Sci. Technol., 2004, 39, no 2, 125–130. doi: 10.1179/147842204225016949
16. I.S. Cole, D.A. Paterson and D. Lau: in book “Physical techniques in the study of art, archaeology and cultural heritage”, (ed. D. Creagh and D. Bradley), Amsterdam, Elsevier, 2007, Chap. 3, 115–153.
17. ISO 8407:2021. Corrosion of metals and alloys - Removal of corrosion products from corrosion test specimens. International Standards Organization.
18. ISO 9225-2012. Corrosion of metals and alloys – Corrosivity of atmospheres – Measurement of environmental parameters affecting corrosivity of atmospheres. International Standards Organization, Geneva, 2012.
19. Y.Panchenko, A.Marshakov, L.Nikolaeva and T.Igonin, Corrosion resistance of structural metals depending on the sample orientation and initial exposure conditions in coastal and rural atmospheres. Part 1. Corrosivity toward structural metals at coastal and rural test sites under various exposure conditions, Corros. Eng., Sci. Technol., 2020, 55, no. 8, 655–669. doi:10.1080/1478422X.2020.1772535
20. ГОСТ-9.107-2023. Единая система защиты от коррозии и старения. Коррозионная агрессивность атмосферы. Основные положения.
Review
For citations:
Panchenko Y.M., Marshakov A.I., Nenasheva T.A., Igonin T.N., Kutyrev A.E., Fomina M.A., Vdovin A.I. Corrosion resistance of structural metals with different sample orientations at different distances from the seashore. Title in english. 2024;(2):29-44. (In Russ.) https://doi.org/10.61852/2949-3412-2024-2-2-29-44
Views:
122
Email this article 